巨箭pc（聚碳酸  酯）單組分膠粘劑  g-933

致力于特殊產品描述g-933 pc jukam jujian膠系統采用專用樹脂。pc、ps、hips、粘接abs，pvc，pmma，gp，作為和其他硬膠粘貼或相互粘連，經室溫自然固化，定位時間快，固化后的膠粘劑  ，完全的不發白、防水、防腐、防銹性能優秀。

committed to

special product deｓｃｒｉｐｔion g-933 pc jukam jujian adhesive system uses special

resin. pc, ps, hips, bonding abs, pvc, pmma, gp, as【敏感詞】other hard glue paste

or mutual adhesion, the room temperature natural curing, positioning time fast,

curing adhesive, completely not white, waterproof, corrosion , excellent

anti-rust performance.

三，操作說明：第一步：表面處理，首先要去除材料表面的油或灰塵。第二步：上膠、上膠應均勻厚度、到位，不留粘合盲區。第三步：膠水快速粘合后立即加壓，使兩側緊密貼合！

third, the

operating instructions: the first step: surface treatment, first of all to

remove the material surface of the oil【敏感詞】dust. the second step: glue, glue

should be uniform thickness, in place, leaving no bonding blind spot. the third

step: glue immediately after the rapid bonding pressure, so that both sides

close fit!

第四步：g-933l膠適用于針筒、粘合透明pc塑料，沒有白色霧狀，沒有痕跡，定位快速（3-6秒定位），30分鐘左右具有撕裂材質效果

the fourth step:

g-933l glue for syringes, adhesive transparent pc plastic, no white mist, no

traces, positioning fast (3-6 seconds positioning), 30 minutes【敏感詞】so with tear

material effect

g-933m膠貼合后，約10-15分鐘定位，24小時后測試強度

g-933m glue after

bonding, about 10-15 minutes positioning, 24 hours after the test strength

g-933h膠貼合后，約30-45分鐘定位，24小時完全固化！

g-933h glue after

bonding, about 30-45 minutes positioning, 24 hours fully cured!

四、包裝

90ml /支，1公斤/桶，4公斤/桶，15公斤/桶，

four, packaging

90ml / support, 1

kg / barrel, 4 kg / barrel, 15 kg / barrel,

五、貯存和質量

存放在陰涼干燥的地方！遠離火。放置在兒童接觸不到的地方!在室溫下保質期為12個月。

five, storage and

quality

store in a cool dry

place! away from fire placed in children not reach the place! at room

temperature shelf life of 12 months.