1、適用范圍：五金、金屬、玻璃、陶瓷、電鍍、大理石等材料絲印移印

2、特性：耐沖壓、耐折彎、免烘烤自干、耐酒精、耐酸  堿  、耐汽油、耐腐蝕。

3、技術參數：

a.粘度：8000-12000cps；

b.細度：5um↓、光澤：60°↑；

c.干燥條件：自干24小時；

d.鉛筆硬度：2h↑；

e.耐酒精：99％乙醇500g力來回超過30次；

f.耐磨：500g力來回超過30次；

g.過網性能：77t-145t網紗；

4、稀釋劑  的選擇：稀釋劑  ：s-3；使用前添加10％-15％的db-01固化劑  效果更好。

5、注意事項：

a.不可與其它油墨混用；

b.使用s-3慢干稀釋劑  稀釋；

c.加過固化劑  的油墨必須在3小時內用完；

d.密封保存，遠離火源。

6、應急處理措施：

備注：由于材料及使用中的變數，可能是結果會有變化，以上數據僅供參考，使用前請自行測試。

1, the scope of application: no halogen ink can be printed, abs, pc, ps, acrylic, metal, electroplating, uv surface.

2, characteristics: medium【敏感詞】dry, ethanol, acid resistance.

3, technical parameters:

a. viscosity: 8000-12000cps;

b.: 5um:: gloss, fineness of 60 degrees up;

c. dry conditions: 24 hours from dry;

d. pencil hardness: 2h up;

e. resistance to alcohol: 99％ ethanol 500g force back【敏感詞】forth more than 30 times;

f. wear: 500g force back【敏感詞】forth more than 30 times;

g. n e t performance: 77t-145t;

4, thinner choice: thinner: s-3; before using the 10％-15％ to add db-01 curing agent better effect.

5, matters needing attention:

a.【敏感詞】other printing ink;

b. using s-3 slow dry diluent dilution;

c. plus the curing agent of the ink must be used up within 3 hours;

d. sealed to save, away from the fire source.

6, emergency treatment measures:

a. such as dipped into the eye immediately clear water cleaning, serious medical treatment,

b. fire fighting measures: dry powder, foam fire extinguisher【敏感詞】sand.

] note: due to the materials【敏感詞】the use of variables, possibly is the change, the above data are for reference only, before using please self testing.